• Refer to your instruction leaflet and mix carefully to ensure accurate results.
• Mix for at least 3 minutes, scraping the sides and the bottom of the container 
• By Volume A : B = 200 : 100  (200 parts Resin : 100 parts Hardener) (For example 200ml Resin : 100ml Hardener)
• By Weight  A : B = 300 : 100 (300 parts Resin : 100 parts Hardener) (For example 300g Resin : 100g Hardener)
• Work time - 60 - 90 minutes at 25°C
• Cure time - Demould 16 - 24 Hours (based on constant room temperature of 25ºc and pour depth of 15cm) Cure time of pours below 15cm approx 24 - 48 Hours. Cure times can vary based on pour depth and room temperature. Can be sanded after 3 - 5 days
• Viscosity - Low
• Heat Resistance - up to 120°C
• Extremely Durable
• Apex Resin Deep Cast is a deep pouring resin and is designed to be poured at a thickness between 10 - 30cm. It can be used for pouring at a thickness below 10cm, however we recommend the maximum mixing quantity to be no more than 9 Litres. This is based on a room temperature between 18 - 25°C. Temperatures above or below this may not produce the same results. For shallow castings we recommend our Apex Resin High Gloss.
• Coverage - 1 Litre covers approximately 2m2 
• Shelf life - 12 months in sealed containers

Please note it is your responsibility to read all health and safety instructions before using this product. 

Our resins have been formulated with the most up to date epoxy resin chemicals and technology and with safety in mind. Apex Resin is safe for home use. (When used as directed)

As with all Resins, it is important that you read the safety precautions associated with our product carefully before use and contact us if you have any questions.

• Always wear nitrile gloves
• Wear a respirator when sanding partially cured resin 
• Work in a well ventilated room
• Although a respirator is essential when sanding partially cured resin, we also recommend the use of one whenever working with resin for complete protection, especially when additives such as inks, paints, pigments have been added to resin
• Wear safety goggles
• Avoid skin contact, if contact occurs-wash with soap and water
• Allow the resin to fully cure before handling
• Avoid contact with clothes and furniture. If resin is poured on unwanted areas wipe immediately with a clean, dry cloth using acetone or similar solvent 
• Do not eat, drink or smoke while working
• In case of eye contamination wash with plenty of water for more than 15 minutes and seek medical advice immediately.
• If swallowed, seek medical advice immediately if you feel unwell
• If alcohol inks have been used, do not use a flame as alcohol is flammable
• Keep out of reach of children 
• Safe for incidental food contact only and not as a food preparation or cutting surface. Food should not exceed 50°C

Apex Resin Deep Cast Safety Data Sheet