Skip to content

Staying Safe in the Studio: The Ultimate Guide to Working with Epoxy Resin!

1 to 1 Resin Art Class

Thank you to the lovely Lou from Create and Bloom Crafts for this fantastic blog post. Lou is an expert in the use of Apex Resin and her knowledge of resin safety will ensure you have fun and stay safe whilst using an epoxy resin. 

She also stocks a huge and expanding range of products, designed with love and with years of knowledge. Lou is an expert in the use of Apex Resin and her products perform (after extensive testing) the best with our resin. Check out her full range of products and classes here. 

Create and Bloom Crafts

Hey there!

If you’re diving into the mesmerising world of epoxy resin, you’re probably buzzing with excitement about all the incredible creations you can make. But before you get lost in a sea of vibrant Create and Bloom pigments and glittery goodness, let’s talk about something super important: health and safety!

Yes, I know, it might not sound as fun as pouring a perfect geode or crafting that stunning ocean wave effect but trust me, knowing how to stay safe while you work with epoxy resin is crucial for your long-term crafting journey. So, grab your nitrile gloves, don your safety glasses, and let’s make health and safety as fun as a resin dirty pour!

  1. Get to Know Your Resin

First things first understand your resin. Not all resins are created equal! Epoxy resin is a two-part system, usually consisting of a resin and a hardener. When these two parts mixes, they undergo a chemical reaction that creates that glossy, rock-hard finish we all love – that reaction is called an Exothermic reaction But guess what? That reaction can release fumes that may be an irritant to some or even toxic, depending on the brand of resin you are using. Always take a minute to read the manufacturer’s safety guidelines and Material Safety Data Sheet (MSDS) to know exactly what you’re working with. You may also like to use the same resin as me - Apex Resin, a non-toxic safe to use at home resin. 

  1. Ventilation is Your BFF

Proper ventilation is key to keeping the air clean and your lungs happy. Working in a well-ventilated area is encouraged. If you’re indoors, open windows and use fans to help circulate air. Some artists swear by using a respirator mask, especially when working with larger batches of resin or for extended periods. Remember, fresh air is the best air! A respirator is absolutely essential if you are adding chemicals to your resin, or if you are sanding your resin.

  1. Dress for Success… or at Least for Safety!

You might not be walking a fashion runway, but you should still dress the part! Gloves are a must, nitrile gloves, specifically, as they’re resistant to chemicals found in resin. Skip the latex, they don’t offer the same protection. Long sleeves, old clothes, and safety glasses are also essential – especially if you’re likely to spill or rub your face. Resin has a knack for getting everywhere, and trust me, resin in your hair or on your skin is not a good look!

  1. Say No to Bare Surfaces

It’s tempting to just start pouring resin on any surface available, but that’s a quick way to ruin your furniture. Protect your workspace by covering it with a disposable plastic tablecloth or using silicone mats that can be easily cleaned. And don’t forget to use levelling tools, resin has a mind of its own and loves to find the lowest point to settle in!

  1. Measure Twice, Mix Once

Precision is key when mixing resin. Improper mixing can lead to incomplete curing, sticky surfaces, or even reactions. Follow the manufacturer's instructions to a T. Use separate containers to measure your resin and hardener, then mix them in a third container to avoid contamination. Stir slowly to avoid air bubbles, resin is not a milkshake, folks!

  1. Heat Things Up Safely

Some resin projects require a bit of heat to remove bubbles but be careful! Excessive heat can cause the resin to cure too quickly, leading to cracks or unwanted textures. Always use a heat gun with caution, and avoid open flames, resin is flammable.  Also wear your respirator when heating your resins excessively.  

  1. Cleanup: A Sticky Situation

When it comes to resin, prevention is better than cure. Wipe up spills immediately with paper towels or alcohol wipes, resin is much easier to clean before it cures. And remember, cured resin won’t come out of clothing, so wear your “resin uniform” proudly. If resin does get on your skin, wash it off immediately with soap and water – I like to add a dash of sugar in the mix, to act as an exfoliant.  Avoid using solvents like acetone, which can irritate your skin further.

  1. Disposal: Don’t Ghost Your Resin Waste!

Resin waste needs to be disposed of properly. Never pour liquid resin down the drain, it can clog pipes and is harmful to the environment. Check with your local waste management service to see how to properly dispose of resin and its containers. I take my empty bottles to my local ‘tip’ – refuge centre – and they dispose of my empties correctly for me.

  1. Keep Curious Hands and Paws Away

Lastly, remember that pets and children are naturally curious. They love shiny things and might see your resin projects as a new toy. Keep your workspace off-limits to keep everyone safe and sound.

  1. Knowledge is Power

Stay updated with resin safety practices. Join online forums, follow resin artists, and always be ready to learn new tips and tricks for safe crafting. Remember, being informed is your first line of defence!  But, remember guys, there’s lots of horror stories out there, don’t let people scare you – if ever you are unsure, contact the company that you purchased your resin from for more information. Some people naturally have allergies, some people don’t take precautions, and some people like to scare others – always bear that in mind.

   11. Wrap-Up

There you have it, a fun, easy guide to staying safe while you create your resin masterpieces. So, roll up those sleeves (metaphorically, keep them down to protect your arms), mix up your resin, and let’s get crafting…safely!

Happy pouring, everyone! And remember, safety first, art second, and fun always!

Leave a comment

Please note, comments must be approved before they are published

Back to top